SPC563M64AVB144 Datasheet, PDF (1/6 Pages) STMicroelectronics – Allows system calibration regardless of availability of standard MCU external bus

SPC563M64AVB144/176
SPC563Mxx microcontroller family calibration and emulation
system
Data brief
Features
■ Support for LQFP144 and LQFP176 MCU
production packages allowing calibration
systems to be built without requiring
modifications to the standard production
system housing
■ VertiCal interconnect standard supported by
multiple calibration tool developers, ensuring
maximum flexibility in tool choice.
■ On-board latch providing a 16-bit de-
multiplexed bus interface from the
SPC563M64 16-bit multiplexed calibration
interface.
■ Support for Nexus-based debug tools even if
application PCB does not include Nexus
connector.
■ Nexus functionality with 12 Message Data Out
(MDO) signals.
■ Support for full-feature calibration tools, via
availability of comprehensive set of device
signals available on VertiCal connector.
■ Allows system calibration without impacting
standard MCU I/O resources.
■ Allows system calibration regardless of
availability of standard MCU external bus.
■ Specifications:
– Board Size 30 x 40.5mm
– Target connector compatible with
TQPACK144SD and TQPACK176SD
sockets
Description
The Vertical Adapter is designed to substitute the
device on an ECU version used during engine
calibration.
All VertiCal hardware is designed to support a
standardized tool connector, allowing a variety of
calibration and debug hardware to be connected
and reused.
VertiCal components are available to support a
wide range of SPC563M64 devices in various
package types.
The complete system consists of a
SPC563M64AVB144/176 board, a calibration
RAM board SPC56XVTOP-M and a POLYPOD-
TQ144/176 Poly-Pod which plugs directly into the
motherboard.
September 2013
Doc ID 023382 Rev 3
For further information contact your local STMicroelectronics sales office.
1/6
www.st.com
1