SPBT2563C1 Datasheet, PDF (1/13 Pages) STMicroelectronics – Bluetooth™ class 1 module

SPBT2563C1
Bluetooth™ class 1 module
Preliminary Data
Features
■ Bluetooth^TM specification compliant V2.0
■ Output power class 1 ( 20 dBm max)
■ Transmission rate up to 721 Kbps in BR
■ Point-to-point, point-to-multi-point (up to 7
slaves) and scatternet capability
■ Asynchronous Connection Oriented (ACL)
logical transport link
) _{■ Synchronous Connection Oriented link: 2}
t(s ^{simultaneous SCO channels capability}
c _{■ Pitch-Period Error Concealment (PPEC)}
u _{improves speech quality in the vicinity of}
rod ^{interference like e.g. WLAN}
■ Extended SCO (eSCO) links
te ^{P ■ Packet types supported:}
le ^{– ACL: DM1, DM3, DM5, DH1, DH3, DH5}
o ^{– SCO: HV1, HV3 and DV}
s _{– eSCO: EV3, EV4, EV5}
b _{■ Adaptive Frequency Hopping (AFH): hopping}
- ^{O kernel, channel assessment as master and as}
) slave
t(s ^{■ Efficient and flexible support for WLAN}
c coexistence in collocated scenario
u _{■ Communication interfaces:}
rod ^{– Fast UART up to 4 Mbit/s}
– SPI interface
P _{– PCM interface}
lete ^{■ Memory organization:}
o ^{– On chip RAM, including provision for}
s_patches
b_{– On chip ROM, preloaded with FW up to}
O _HCI
Order code
■ SPBT2563C1
Description
SPBT2563C1, class 1 radio module is highly
integrated for easy implementation in embedded
applications. Class 1 module enables wireless
communication with other Bluetooth enabled
devices up to 100 m away. The SPBT2563C1
integrates on a unique FR4 PCB support: BT 2.0
radio, 32.768 kHz and 26 MHz oscillators, Vreg as
well as PA function. The antenna has not been
included in order to grant a degree of freedom to
the user in selecting the most suitable design and
placement between external and integrated
antenna that could be SMA aerial or a low cost
antenna trace designed on PCB. The module is
based on the ST Bluetooth Transceiver
STLC2500C and can be interfaced by the host
processor by means of a UART or SPI line
(selectable by a pin) for HCI transport, and PCM
for voice. SPBT2563C1 module implements an
add-on feature perfectly fitting in systems
equipped with host processor capable to manage
upper and lower Bluetooth stack layers, including
profiles. ST Bluetooth SPBT2563 series is
■ 3.3 V single supply voltage
specifically targeting all those applications
requiring Bluetooth devices integrating up to HCI
■ No external oscillator required
level. Conformance testing through Bluetooth
■ Integrated voltage regulator with Inhibit
function.
qualification program enables a fast time to
market after system integration, by ensuring a
■ Module size: 17 x 29 mm
high degree of compliance and interoperability.
November 2007
Rev 1
This is preliminary information on a new product now in development or undergoing evaluation.
Details are subject to change without notice.
1/13
www.st.com
13