RM0345 Datasheet, PDF (1/38 Pages) STMicroelectronics – calibration adapter board for SPC563M64xx devices

RM0345
Reference manual
SPC563M64CAL144
calibration adapter board for SPC563M64xx devices
Introduction
The SPC563M64CAL144 (rev.B) system is designed to enable the use of new enhanced
automotive calibration and debug tools on the SPC563M64xx family of automotive
microcontrollers.
The SPC563M64CAL144 (rev.B) can be fitted onto the application printed circuit board
(PCB) in place of the standard SPC563M64xx family microcontroller in LQFP144 package.
SPC563M64CAL144 (rev.B) hardware is designed to support two standardized tool
connectors, allowing a variety of calibration and debug hardware to be connected and
reused
Figure 1. SPC563M64CAL144 (rev.B)
Table 1. Board summary
Order code
SPC563M64CAL144
On board device
SPC563M64xx
*$3*5,
Target footprint
QFP144
September 2013
Doc ID 024080 Rev 3
1/38
www.st.com