P-NUCLEO-CLD1 Datasheet, PDF (1/4 Pages) STMicroelectronics – The STM32 Nucleo pack P-NUCLEO-CLD1

P-NUCLEO-CLD1
STM32Nucleo pack for IoT node with Wi-Fi, sensors and NFC
connected to the cloud
Data brief
Features
 NUCLEO-F401RE: STM32 Nucleo-64
development board with STM32F401RE
MCU, supports Arduino UNO R3 and ST
morpho connectivity
 X-NUCLEO-IDW01M1: Wi-Fi expansion
board based on SWPF01SA module
 X-NUCLEO-IKS01A2: Motion MEMS and
environmental sensor expansion board
 X-NUCLEO-NFC01A1: Dynamic NFC tag
expansion board based on M24SR
 Out-of-the-box software support to connect
the device to the IBM Watson IoT cloud or to
the Microsoft Azure IoT cloud, by using one
of the following package:
 FP-CLD-AZURE1: STM32 ODE
function pack for IoT node with Wi-Fi,
NFC and sensors, connected to
Microsoft Azure IoT cloud
 FP-CLD-WATSON1: STM32 ODE
function pack for IoT node with Wi-Fi,
NFC and sensors for vibration analysis,
connected to IBM Watson IoT Cloud
 RoHS compliant
Description
The STM32 Nucleo pack P-NUCLEO-CLD1 is a
hardware kit composed of the following boards:
NUCLEO-F401RE, X-NUCLEO-IDW01M1, X-
NUCLEO-IKS01A2 and X-NUCLEO-NFC01A1.
The P-NUCLEO-CLD1 is supported by two
software packages (FP-CLD-AZURE1, FP-CLD-
WATSON1) from the STM32 Open Development
Environment. Both software packages (FP-CLD-
AZURE1, FP-CLD-WATSON1) contain ready to
use binaries to connect in just a few minutes the
STM32 Nucleo board with a web dashboard
running on the cloud for sensor data
visualization.
The P-NUCLEO-CLD1 used with FP-CLD-
AZURE1 or FP-CLD-WATSON1 allows to
transmit sensors data to the cloud and to receive
commands from cloud applications. Wi-Fi
parameter configuration is also greatly simplified
thanks to the supported NFC connectivity. It
enables connecting your device to the cloud and
let you jump-start end-to-end IoT development so
that you can focus on adding desired functions.
March 2017
DocID030439 Rev 1
1/4
www.st.com