M74HC4316 Datasheet, PDF (1/11 Pages) STMicroelectronics – QUAD BILATERAL SWITCH

M74HC4316
QUAD BILATERAL SWITCH
s HIGH SPEED:
t_PD = 13ns (TYP.) at V_CC = 6V
s LOW POWER DISSIPATION:
I_CC = 1µA(MAX.) at V_cc = 5V
s LOW "ON" RESISTANCE:
120Ω TYP. (V_CC - V_EE = 2V)
50Ω TYP. (V_CC - V_EE = 4.5V)
35Ω TYP. (V_CC - V_EE = 9V)
s WIDE ANALOG INPUT VOLTAGE
RANGE ± 6v
s LOW CROSSTALK BETWEEN SWITCHES
s FAST SWITCHING
s SINE WAVE DISTORTION:
0.020 at V_CC - V_EE = 9V
s HIGH NOISE IMMUNITY:
V_NIH = V_NIL = 28 % V_CC (MIN.)
s PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 4316
DESCRIPTION
The M74HC4316 is an high speed CMOS QUAD
BILATERAL SWITCH fabricated with silicon gate
C²MOS technology.
This device has four independent analogue
switches. Each switch has two input/output
terminals (nI/O, nO/I) and an active high select
input (nC).
DIP
SOP
TSSOP
ORDER CODES
PACKAGE
TUBE
T&R
DIP
SOP
TSSOP
M74HC4316B1R
M74HC4316M1R M74HC4316RM13TR
M74HC4316TTR
When the enable input is high, all four analog
switches are off. The supply voltage for the digital
signals applied to V_CC and GND must be whitin
the range 0 to 6 V. The voltage swing on the
analogue Inputs/Outputs can be between V_CC
(positive limit) and V_EE (negative limit). The
voltage between V_CC and V_EE must not exceed
12V.
All inputs are equipped with protection circuits
against static discharge and transient excess
voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
July 2001
1/11