M74HC164_03 Datasheet, PDF (1/13 Pages) STMicroelectronics – 8 BIT SIPO SHIFT REGISTER

M74HC164
8 BIT SIPO SHIFT REGISTER
s HIGH SPEED :
f_MAX = 62MHz (TYP.) at V_CC = 6V
s LOW POWER DISSIPATION:
I_CC =4µA(MAX.) at T_A=25°C
s HIGH NOISE IMMUNITY:
V_NIH = V_NIL = 28 % V_CC (MIN.)
s SYMMETRICAL OUTPUT IMPEDANCE:
|I_OH| = I_OL = 4mA (MIN)
s BALANCED PROPAGATION DELAYS:
t_PLH ≅ t_PHL
s WIDE OPERATING VOLTAGE RANGE:
V_CC (OPR) = 2V to 6V
s PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 164
DESCRIPTION
The M74HC164 is an high speed CMOS 8 BIT
SIPO SHIFT REGISTER fabricated with silicon
gate C²MOS technology.
The M74HC164 is an 8 bit shift register with serial
data entry and an output from each of the eight
stages. Data is entered serially through one of two
inputs (A or B), either of these inputs can be used
as an active high enable for data entry through the
other input. An unused input must be high, or both
inputs connected together. Each low-to-high
DIP
SOP
TSSOP
ORDER CODES
PACKAGE
TUBE
DIP
SOP
TSSOP
M74HC164B1R
M74HC164M1R
T&R
M74HC164RM13TR
M74HC164TTR
transition on the clock inputs shifts data one place
to the right and enters into QA the logic NAND of
the two data inputs (A x B), the data that existed
before the rising clock edge. A low level on the
clear input overrides all other inputs and clears the
register asynchronously, forcing all Q outputs low.
All inputs are equipped with protection circuits
against static discharge and transient excess
voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
June 2003
1/13