M54HC367_04 Datasheet, PDF (1/11 Pages) STMicroelectronics – RAD-HARD HEX BUS BUFFER WITH 3 STATE OUTPUT NON INVERTING

M54HC367
RAD-HARD HEX BUS BUFFER
WITH 3 STATE OUTPUT NON INVERTING
s HIGH SPEED:
t_PD = 9ns (TYP.) at V_CC = 6V
s LOW POWER DISSIPATION:
I_CC = 4µA(MAX.) at T_A=25°C
s HIGH NOISE IMMUNITY:
V_NIH = V_NIL = 28% V_CC (MIN.)
s SYMMETRICAL OUTPUT IMPEDANCE:
|I_OH| = I_OL = 6mA (MIN)
s BALANCED PROPAGATION DELAYS:
t_PLH ≅ t_PHL
s WIDE OPERATING VOLTAGE RANGE:
V_CC (OPR) = 2V to 6V
s PIN AND FUNCTION COMPATIBLE WITH
54 SERIES 367
s SPACE GRADE-1: ESA SCC QUALIFIED
s 50 krad QUALIFIED, 100 krad AVAILABLE ON
REQUEST
s NO SEL UNDER HIGH LET HEAVY IONS
IRRADIATION
s DEVICE FULLY COMPLIANT WITH
SCC-9401-044
DESCRIPTION
The M54HC367 is an high speed CMOS HEX
BUS BUFFER 3-STATE OUTPUTS fabricated
with silicon gate C²MOS technology.
DILC-16
FPC-16
ORDER CODES
PACKAGE
FM
DILC
FPC
M54HC367D
M54HC367K
EM
M54HC367D1
M54HC367K1
This device contains six buffers, four buffers are
controlled by an enable input (G1) and the other
two buffers are controlled by the other enable
input (G2); the outputs of each buffer group are
enabled when G1 and/or G2 inputs are held low,
and when held high, these outputs are disabled in
a high-impedance state.
All inputs are equipped with protection circuits
against static discharge and transient excess
voltage.
PIN CONNECTION
May 2004
Rev. 1
1/11