M54HC352 Datasheet, PDF (1/11 Pages) STMicroelectronics – HC353: DUAL 4 CHANNEL MULTIPLEXER 3 STATEOUTPUTINV. HC352: DUAL 4 CHANNEL MULTIPLEXERINV.

M54/74HC352
M54/74HC353
HC352: DUAL 4 CHANNEL MULTIPLEXER(INV.)
HC353: DUAL 4 CHANNEL MULTIPLEXER 3 STATE OUTPUT(INV.)
. HIGH SPEED
t_PD = 12 ns (TYP.) AT V_CC = 5 V
. LOW POWER DISSIPATION
ICC = 4 µA (MAX.) AT TA = 25 °C
. OUTPUT DRIVE CAPABILITY
10 LSTTL LOADS
. BALANCED PROPAGATION DELAYS
tPLH = tPHL
. SYMMETRICAL OUTPUT IMPEDANCE
I_OL = IOH = 4 mA (MIN.)
. HIGH NOISE IMMUNITY
VNIH = VNIL = 28 % VCC (MIN.)
. WIDE OPERATING VOLTAGE RANGE
V_CC (OPR) = 2 V TO 6 V
. PIN AND FUNCTION COMPATIBLE
WITH 54/74LS352/353
B1R
(Plastic Package)
F1R
(Ceramic Package)
M 1R
(Micro Package)
C1R
(Chip Carrier)
ORDER CODES :
M54HCXXXF1R M74HCXXXM1R
M74HCXXXB1R M74HCXXXC1R
PIN CONNECTIONS (top view)
DESCRIPTION
The M54/74HC352 and M54/74HC353 are high
speed CMOS DUAL 4 CHANNEL MULTIPLEXERS
INVERTING fabricated with silicon gate C²MOS
technology.
Both achieve high speed operation, similar to equi-
valent LSTTL while maintaining the CMOS low
power dissipation. The designer has a choice of
complementary output (HC352) and 3 state output
(HC353). Each of these data (1C0-1C3, 2C0-2C3)
is selected by the two address inputs A and B.
Separate strobe inputs (1G, 2G) are provided for
each of the two four line sections. Taking the strobe
input (1G, 2G) high inhibits the outputs. The output
of HC352 is fixed at logic low level and the output of
HC353 has a high impedance, unconditionally.
All inputs are equipped with protection circuits
against static discharge and transient excess volt-
age.
NC =
No Internal
Connection
October 1993
1/11