M54HC292 Datasheet, PDF (1/14 Pages) STMicroelectronics – PROGRAMMABLE DIVIDER/TIMER

M54/74HC292/7292
M54/74HC294/7294
PROGRAMMABLE DIVIDER/TIMER
. HIGH SPEED
f_MAX = 70 MHz (TYP.) at V_CC = 5 V
. LOW POWER DISSIPATION
ICC = 4 mA (MAX.) at TA = 25 ^oC
. HIGH NOISE IMMUNITY
V_NIH = V_NIL = 28 % V_CC (MIN.)
. OUTPUT DRIVE CAPABILITY
10 LSTTL LOADS
. SYMMETRICAL OUTPUT IMPEDANCE
| I_OH|= I_OL = 4 mA (MIN.)
. BALANCED PROPAGATION DELAYS
tPLH = tPHL
. WIDE OPERATING VOLTAGE RANGE
V_CC (OPR) = 2 V TO 6 V
. PIN AND FUNCTION COMPATIBLE WITH
54/74LS292/294
B1R
(Plastic Package)
F1R
(Ceramic Package)
M 1R
(Micro Package)
C1R
(Chip Carrier)
ORDER CODES :
M54HCXXXF1R M74HCXXXM1R
M74HCXXXB1R M74HCXXXC1R
DESCRIPTION
The 54/74HC292/7292 and HC294/7294 are high
speed CMOS PROGRAMMABLE DIVIDER/TIMER
fabricated with silicon C²MOS technology.
They achieve the high speed operation similar to
equivalent LSTTL while maintaining the CMOS low
power dissipation.
These devices are programmable frequency
dividers. The types have two clock inputs, either one
may be used for clock gating. (see the function
table). The HC292/7292 can divide from 2² to 2³¹,
and the HC294/7294 can divide from 2² to 2¹⁵. The
types feature an active-low clear input to initialize
the state of all flip-flops. To facilitate incoming
inspection, test points are provided. (TP1, TP2 and
TP3 on the HC292/7292 and TP on the
HC294/7294). All inputs are equipped with
protection circuits against static discharge and
transient excess voltage.
HC292/294 have Q output with ”Totem pole”
configuration and test point TP with ”Open Drain”
output configuration.
HC7292/7294 have all outputs ”Totem Pole”.
PIN CONNECTION (top view)
HC292
HC7292
HC294
HC7294
HC292
HC7292
HC294
HC7294
October 1993
1/14