M54HC157 Datasheet, PDF (1/11 Pages) STMicroelectronics – HC158 QUAD 2 CHANNEL MULTIPLEXER INV. HC157 QUAD 2 CHANNEL MULTIPLEXER

M54HC157/158
M74HC157/158
HC157 QUAD 2 CHANNEL MULTIPLEXER
HC158 QUAD 2 CHANNEL MULTIPLEXER (INV.)
. HIGH SPEED
tPD = 10 ns (TYP.) AT VCC = 5 V
. LOW POWER DISSIPATION
I_CC = 4 µA (MAX.) AT T_A = 25 °C
. HIGH NOISE IMMUNITY
VNIH = VNIL = 28 % VCC (MIN.)
. OUTPUT DRIVE CAPABILITY
10 LSTTL LOADS
. SYMMETRICAL OUTPUT IMPEDANCE
IOH = IOL = 4 mA (MIN.)
. BALANCED PROPAGATION DELAYS
t_PLH = t_PHL
. WIDE OPERATING VOLTAGE RANGE
VCC (OPR) = 2 V TO 6 V
. PIN AND FUNCTION COMPATIBLE
WITH 54/74LS157/158
B1R
(Plastic Package)
F1R
(Ceramic Package)
M 1R
(Micro Package)
C1R
(Chip Carrier)
ORDER CODES :
M54HCXXXF1R M74HCXXXM1R
M74HCXXXB1R M74HCXXXC1R
PIN CONNECTIONS (top view)
HC157
DESCRIPTION
The M54/74HC157 and the M54/74HC158 are high
speed CMOS QUAD 2-CHANNEL MULTI-
PLEXER’s fabricated with silicon gate C²MOS tech-
nology. They achieve the high speed operation
similar to equivalent LSTTL while maintaining the
CMOS low power dissipation.
These devices consist of four 2-input digital multi-
plexers with common select and strobe inputs. The
HC158 is an inverting multiplexer while the HC157
is a non-inverting multiplexer. When the STROBE
input is held High, selection of data is inhibited and
all the outputs become Low in the M74HC157 and
High in the M74HC158. The SELECT decoding
determines whether the A or B inputs get routed to
their corresponding Y outputs. All inputs are
equipped with protection circuits against static dis-
charge and transient excess voltage.
HC158
NC =
No Internal
Connection
February 1993
1/11