|
M41T82_08 Datasheet, PDF (1/58 Pages) STMicroelectronics – Serial I2C bus RTC with battery switchover | |||
|
M41T82
M41T83
Serial I2C bus RTC with battery switchover
Features
â Ultra-low battery supply current of 365 nA
â Factory calibrated accuracy ±5 PPM
guaranteed after 2 reflows (SOX18)
â Much better accuracies achievable using
built-in programmable analog and digital
calibration circuits
â 2.0 V to 5.5 V clock operating voltage
â Counters for tenths/hundredths of seconds,
seconds, minutes, hours, day, date, month,
year, and century
â Automatic switchover and reset output circuitry
(fixed reference)
â M41T83S
VCC = 3.00 V to 5.50 V
(2.85 V ⤠VRST ⤠3.00 V)
â M41T83R
VCC = 2.70 V to 5.50 V
(2.55 V ⤠VRST ⤠2.70 V)
â M41T83Z
VCC = 2.38 V to 5.50 V
(2.25 V ⤠VRST ⤠2.38 V)
â Serial interface supports I2C Bus (400 kHz
protocol)
â Programmable alarm with interrupt function
(valid even during battery back-up mode)
â Optional 2nd programmable alarm available
â Square wave output defaults to 32 KHz on
power-up (M41T83 only)
â RESET (RST) output
â Watchdog timer
â Programmable 8-bit counter/timer
â 7 bytes of battery-backed user SRAM
â Battery low flag
â Power-down time stamp (HT bit)
â Low operating current of 80 µA
QFN16, 4 mm x 4 mm (QA)
(VFQFPN16)
18
1
SOX18 (MY, 18-pin, 300 mil SOIC
with embedded crystal)
SO8 (M)
â Oscillator stop detection
â Battery or Super-cap⢠back-up
â Operating temperature of â40°C to 85°C
â Package options include:
â a 16-lead QFN (M41T83),
â an 18-lead embedded crystal SOIC
(M41T83), or
â an 8-lead SOIC (M41T82)
â RoHS compliance: lead-free components are
compliant with the RoHS directive
April 2008
Rev 7
1/58
www.st.com
1
|
▷ |