M27V101 Datasheet, PDF (1/15 Pages) STMicroelectronics – 1 Mbit 128Kb x 8 Low Voltage UV EPROM and OTP EPROM

M27V101
1 Mbit (128Kb x 8) Low Voltage UV EPROM and OTP EPROM
s LOW VOLTAGE READ OPERATION:
3V to 3.6V
s FAST ACCESS TIME: 90ns
s LOW POWER CONSUMPTION:
– Active Current 15mA at 5MHz
– Standby Current 20µA
s PROGRAMMING VOLTAGE: 12.75V ± 0.25V
s PROGRAMMING TIME: 100µs/byte (typical)
s ELECTRONIC SIGNATURE
– Manufacturer Code: 20h
– Device Code: 05h
DESCRIPTION
The M27V101 is a low voltage 1 Mbit EPROM of-
fered in the two ranges UV (ultra violet erase) and
OTP (one time programmable). It is ideally suited
for microprocessor systems requiring large data or
program storage and is organized as 131,072 by 8
bits.
The M27V101 operates in the read mode with a
supply voltage as low as 3V. The decrease in op-
erating power allows either a reduction of the size
of the battery or an increase in the time between
battery recharges.
The FDIP32W (window ceramic frit-seal package)
has a transparent lid which allow the user to ex-
pose the chip to ultraviolet light to erase the bit pat-
tern.
Table 1. Signal Names
A0-A16
Address Inputs
Q0-Q7
Data Outputs
E
Chip Enable
G
Output Enable
P
Program
V_PP
Program Supply
V_CC
Supply Voltage
V_SS
Ground
32
1
FDIP32W (F)
32
1
PDIP32 (B)
PLCC32 (K)
TSOP32 (N)
8 x 20 mm
Figure 1. Logic Diagram
VCC VPP
17
A0-A16
8
Q0-Q7
P
M27V101
E
G
VSS
AI00660B
May 1998
1/15