M27C4002-12F1 Datasheet, PDF (1/18 Pages) STMicroelectronics – UV EPROM and OTP EPROM

M27C4002
4 Mbit (256Kb x16) UV EPROM and OTP EPROM
s 5V ± 10% SUPPLY VOLTAGE in READ
OPERATION
s ACCESS TIME: 45ns
s LOW POWER CONSUMPTION:
– Active Current 70mA at 10MHz
– Standby Current 100µA
s PROGRAMMING VOLTAGE: 12.75V ± 0.25V
s PROGRAMMING TIME: 100µs/word
s ELECTRONIC SIGNATURE
– Manufacturer Code: 20h
– Device Code: 44h
DESCRIPTION
The M27C4002 is a 4 Mbit EPROM offered in the
two ranges UV (ultra violet erase) and OTP (one
time programmable). It is ideally suited for micro-
processor systems requiring large programs and
is organised as 262,144 words of 16 bits.
The FDIP40W (window ceramic frit-seal package)
and the JLCC44W (J-lead chip carrier packages)
have transparent lids which allow the user to ex-
pose the chip to ultraviolet light to erase the bit pat-
tern. A new pattern can then be written to the
device by following the programming procedure.
For applications where the content is programmed
only one time and erasure is not required, the
M27C4002 is offered in PDIP40, PLCC44 and
TSOP40 (10 x 20 mm) packages.
40
1
FDIP40W (F)
40
1
PDIP40 (B)
JLCC44W (J)
PLCC44 (C)
Figure 1. Logic Diagram
TSOP40 (N)
10 x 20 mm
VCC VPP
18
A0-A17
16
Q0-Q15
E
M27C4002
G
August 2001
VSS
AI00727B
1/18