|
M24SR02-Y Datasheet, PDF (1/90 Pages) STMicroelectronics – Support of NDEF data structure | |||
|
M24SR02-Y
Dynamic NFC/RFID tag IC with 2-Kbit EEPROM,
NFC Forum Type 4 Tag and I²C interface
Datasheet - production data
SO8
TSSOP8
UFDFPN8
Package
⢠8-lead small-outline package (SO8)
ECOPACK2®
⢠TSSOP8 ECOPACK2®
⢠UFDFPN8 ECOPACK2®
⢠WFDFDN8 ECOPACK2®(1)(2)
Wafer
WFDFPN8
Digital pad
⢠GPO: configurable General Purpose Output
⢠RF disable: activation/deactivation of RF
commands
Features
I2C interface
⢠Two-wire I2C serial interface supports
1 MHz protocol
⢠Single supply voltage: 2.7 V to 5.5 V
Contactless interface
⢠NFC Forum Type 4 Tag
⢠ISO/IEC 14443 Type A
⢠106 Kbps data rate
⢠Internal tuning capacitance: 25 pF
Memory
⢠256-byte (2-kbit) EEPROM
⢠Support of NDEF data structure
⢠Data retention: 200 years
⢠Write cycle endurance:
â 1 million Write cycles at 25 °C
â 600k Write cycles at 85 °C
⢠Read up to 246 bytes in a single command
⢠Write up to 246 bytes in a single command
⢠7 bytes unique identifier (UID)
⢠128 bits passwords protection
Temperature range
⢠From - 40 °C up to 85 °C
Description
M24SR02-Y belongs to the ST25 family which
includes all STMicroelectronics NFC/RFID tag and
reader products.
The M24SR02-Y device is a dynamic NFC/RFID
tag IC with a dual interface. It embeds an
EEPROM memory. It can be operated from an I2C
interface or by a 13.56 MHz RFID reader or an
NFC phone.
The I2C interface uses a two-wire serial interface,
consisting of a bidirectional data line and a clock
line. It behaves as a slave in the I2C protocol.
The RF protocol is compatible with ISO/IEC
14443 Type A and NFC Forum Type 4 Tag.
1. Preliminary data for automotive grade (under
qualification).
2. Package for automotive grade.
February 2017
This is information on a product in full production.
DocID025386 Rev 10
1/90
www.st.com
|
▷ |