LM324W Datasheet, PDF (1/13 Pages) STMicroelectronics – LOW POWER QUAD OPERATIONAL AMPLIFIERS

LM124W
LM224W - LM324W
LOW POWER QUAD OPERATIONAL AMPLIFIERS
s WIDE GAIN BANDWIDTH : 1.3MHz
s LARGE VOLTAGE GAIN : 100dB
s VERY LOW SUPPLY CURRENT/AMPLI :
375µA
s LOW INPUT BIAS CURRENT : 20nA
s LOW INPUT OFFSET VOLTAGE : 3mV max.
s LOW INPUT OFFSET CURRENT : 2nA
s WIDE POWER SUPPLY RANGE :
SINGLE SUPPLY : +3V TO +30V
DUAL SUPPLIES : ±1.5V TO ±15V
s INPUT COMMON-MODE VOLTAGE RANGE
INCLUDES GROUND
s ESD INTERNAL PROTECTION : 2kV
N
DIP14
((PPllaassttic Pacckkaaggee))
D
SO14
(Plastic Micropackage)
DESCRIPTION
These circuits consist of four independent, high
gain, internally frequency compensated operation-
al amplifiers. They operate from a single power
supply over a wide range of voltages. Operation
from split power supplies is also possible and the
low power supply current drain is independent of
the magnitude of the power supply voltage.
All the pins are protected against electrostatic dis-
charges up to 2000V (as a consequence, the input
voltages must not exceed the magnitude of V_CC+
or V_CC-.)
PIN CONNECTIONS (top view)
P
TSSOP14
(Thin Shrink Small Outline Package)
ORDER CODE
Part
Number
Temperature
Range
LM124W
-55°C, +125°C
LM224W
-40°C, +105°C
LM324W
0°C, +70°C
Example : LM224WN
Package
N
D
P
•
•
•
•
•
•
•
•
•
N = Dual in Line Package (DIP)
D = Small Outline Package (SO) - also available in Tape & Reel (DT)
P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape
&Reel (PT)
September 2003
Output 1 1
Inverting Input 1 2
-
Non-inverting Input 1 3
+
VCC ⁺ 4
Non-inverting Input 2 5 ₊
Inverting Input 2 6
-
Output 2 7
14 Output 4
- ^{13 Inverting Input 4}
+ _{12 Non-inverting Input 4}
11 VCC ^-
+ ^{10 Non-inverting Input 3}
-
9 Inverting Input 3
8 Output 3
1/13