LIS2L02AL_06 Datasheet, PDF (1/17 Pages) STMicroelectronics – MEMS INERTIAL SENSOR:2-axis - +/-2g ultracompact linear accelerometer

LIS2L02AL
MEMS INERTIAL SENSOR:
2-axis - +/-2g ultracompact linear accelerometer
Features
■ 2.4V to 5.25V single supply operation
■ Low power consumption
■ ±2g full-scale
■ 0.3mg resolution over 100Hz bandwidth
■ Embedded self test
■ Output voltage, offset and sensitivity
ratiometric to the supply voltage
■ High shock survivability
■ ECOPACK® Lead-free compliant
(see Section 6)
Description
The LIS2L02AL is a low-power 2-axis linear
capacitive accelerometer that includes a sensing
element and an IC interface able to take the
information from the sensing element and to
provide an analog signal to the external world.
The sensing element, capable of detecting the
acceleration, is manufactured using a dedicated
process developed by ST to produce inertial
sensors and actuators in silicon.
The IC interface is manufactured using a standard
CMOS process that allows high level of
integration
Order codes
Part number
LIS2L02AL
LIS2L02ALTR
Temp range, °C
-40°C to +85°C
-40°C to +85°C
LGA-8
to design a dedicated circuit which is trimmed to
better match the sensing element characteristics.
The LIS2L02AL has a full scale of ±2g and it is
capable of measuring accelerations over a
bandwidth of 2.0 kHz for all axes. The device
bandwidth may be reduced by using external
capacitances. A self-test capability allows to
check the mechanical and electrical signal path of
the sensor.
The LIS2L02AL is available in plastic SMD
package and it is guaranteed to operate over an
extended temperature range of -40°C to +85°C.
The LIS2L02AL belongs to a family of products
suitable for a variety of applications:
– Mobile terminals
– Gaming and Virtual Reality input devices
– Free-fall detection for data protection
– Antitheft systems and Inertial Navigation
– Appliance and Robotics.
Package
LGA-8
LGA-8
Packing
Tray
Tape & Reel
May 2006
Rev 2
1/17
www.st.com
17