LDFM Datasheet, PDF (1/36 Pages) STMicroelectronics – 500 mA very low drop voltage regulator

LDFM
500 mA very low drop voltage regulator
Datasheet - production data
Features
 Input voltage from 2.5 to 16 V
 Very low dropout voltage (300 mV max. at
500 mA load)
 Low quiescent current (200 µA typ. @ 500
mA load)
 Available in 1% precision in PPAK and
DFN6 packages, 2% in DPAK
 500 mA guaranteed output current
 Wide range of output voltages available on
request: adjustable from 0.8 V, fixed up to
12 V in 100 mV steps
 Logic-controlled electronic shutdown
 Power Good (PPAK and DFN packages)
 Fast dynamic response to line and load
changes
 Internal current and thermal protection
 Temperature range: - 40 °C to 125 °C
Applications
 PCs and laptop computers
 Battery-powered equipment
 Industrial and medical equipment
 Portable equipment
Description
The LDFM is a fast, very low drop linear regulator
which operates from an input supply voltage in
the range of 2.5 V to 16 V.
It is available in fixed and adjustable output
voltage versions, from 0.8 V to 12 V.
The LDFM features high output precision, very
low dropout voltage, low noise, and low quiescent
current, therefore suitable for low voltage
microprocessors and memory applications.
Enable logic control pin and Power Good output
are featured on PPAK/DFN packages.
Current and thermal protection are provided.
September 2016
DocID023585 Rev 4
This is information on a product in full production.
1/36
www.st.com