|
LDF Datasheet, PDF (1/33 Pages) STMicroelectronics – 1 A very low drop voltage regulator | |||
|
LDF
1 A very low drop voltage regulator
Datasheet - production data
Features
ï· Input voltage from 2.6 to 16 V
ï· Very low-dropout voltage (500 mV max. at
1 A load)
ï· Low quiescent current (200 μA typ. @ 1 A
load)
ï· Available in 1% precision in PPAK and
DFN6 packages, 2% in DPAK
ï· 1 A guaranteed output current
ï· Wide range of output voltages available on
request: adjustable from 0.8 V, fixed up to
12 V in 100 mV steps
ï· Logic-controlled electronic shutdown
ï· Power Good (PPAK and DFN packages)
ï· Fast dynamic response to line and load
changes
ï· Internal current and thermal protections
ï· Temperature range: -40 °C to 125 °C
Applications
ï· Computer and laptop
ï· Battery-powered equipments
ï· Industrial and medical equipment
ï· Consumer and set-top box
Description
The LDF is a fast, very low drop linear regulator
which operates from an input supply voltage in
the range of 2.6 V to 16 V.
It is available in fixed and adjustable output
voltage versions, from 0.8 V to 12 V.
The LDF features are: high output precision, very
low-dropout voltage, low noise, and low
quiescent current, therefore suitable for low
voltage microprocessors and memory
applications.
Enable logic control pin and power-good output
are featured on PPAK/DFN packages.
Current and thermal protection are provided.
April 2017
DocID025502 Rev 2
This is information on a product in full production.
1/33
www.st.com
|
▷ |