LD59015 Datasheet, PDF (1/17 Pages) STMicroelectronics – Logic-controlled electronic shutdown

LD59015
150 mA low noise and high PSRR linear voltage regulator
Datasheet - production data
• Package: SOT323-5L
• Temperature range: -40 °C to 125 °C
Description
SOT323-5L
Features
• Input voltage from 2.4 to 5.5 V
• Very low quiescent current (31 µA typ. at no
load, 75 µA typ. at 150 mA load, 1 µA max. in
OFF mode)
• Very low noise (20 µV_RMS at V_OUT = 1.5 V)
• Output voltage tolerance: ± 1.8% at 25 °C
• 150 mA guaranteed output current
The LD59015 provides 150 mA maximum current
with an input voltage range from 2.4 V to 5.5 V,
and a typical dropout voltage of 150 mV. It is
stable with ceramic capacitors. High PSRR, low
quiescent current and low noise features make it
suitable for low power battery-powered
applications. Power supply rejection is 80 dB at
low frequency and starts to roll off at 10 kHz. The
enable logic control function puts the LD59015 in
shutdown mode, allowing a total current
consumption lower than 1 µA. The device also
includes short-circuit constant current limiting and
thermal protection. Typical applications are
mobile phones, personal digital assistants
(PDAs), cordless phones and similar battery-
powered systems.
• Wide range of output voltages available on
request: 0.8 V to 3.3 V in 100 mV steps
• Logic-controlled electronic shutdown
• Compatible with ceramic capacitors
• Very high PSRR (80 dB @ 100 Hz, 76 @
10 kHz, 54 @ 100 kHz)
• Internal current and thermal limit
Table 1. Device summary
Order codes
Output voltages
LD59015C08R
LD59015C12R
LD59015C15R
LD59015C18R
LD59015C25R
LD59015C30R
LD59015C33R
0.8 V
1.2 V
1.5 V
1.8 V
2.5 V
3.0 V
3.3 V
April 2014
This is information on a product in full production.
DocID17488 Rev 4
1/17
www.st.com