LD2985 Datasheet, PDF (1/13 Pages) STMicroelectronics – VERY LOW DROP AND LOW NOISE VOLTAGE REGULATOR LOW ESR CAP. COMPATIBLE, WITH INHIBIT FUNCTION

LD2985
SERIES
VERY LOW DROP AND LOW NOISE VOLTAGE REGULATOR
LOW ESR CAP. COMPATIBLE, WITH INHIBIT FUNCTION
s VERY LOW DROPOUT VOLTAGE (280mV
AT 150mA AND 7mV AT 1mA LOAD)
s VERY LOW QUIESCENT CURRENT (2mA
TYP. AT 150mA LOAD AND 80µA AT NO
LOAD)
s OUTPUT CURRENT UP TO 150mA
s LOGIC CONTROLLED ELECTRONIC
SHUTDOWN
s OUTPUT VOLTAGE OF 1.5, 1.8, 2.5, 2.8,
2.85, 3, 3.1, 3.2, 3.3, 3.5, 3.6, 3.8, 4, 4.7, 5V
s INTERNAL CURRENT AND THERMAL LIMIT
s AVAILABLE IN ± 1% TOLLERANCE (AT 25°C,
A VERSION)
s LOW OUTPUT NOISE VOLTAGE 30µVrms
s SMALLEST PACKAGE SOT23-5L
s TEMPERATURE RANGE: -40°C TO 125°C
DESCRIPTION
The LD2985 is a 150mA fixed output voltage
regulator. The ultra low drop voltage and the low
quiescent current make them particularly suitable
for low noise, low power applications, and in
battery powered systems. In sleep mode
quiescent current is less than 1µA when INHIBIT
pin is pulled low. Shutdown Logic Control Function
SOT23-5L
is available on pin 3 (TTL compatible). This means
that when the device is used as local regulator, it
is possible to put a part of the board in standby,
decreasing the total power consumption.
An external capacitor, C_BYP=10nF, connected
between bypass pin and GND reduce the noise
to 30µVrms.
Typical application are in cellular phone, palmtop
laptop computer, personal digital assistant (PDA),
personal stereo, camcorder and camera.
SCHEMATIC DIAGRAM
July 2003
1/13