LCP154DJF Datasheet, PDF (1/13 Pages) STMicroelectronics – Programmable transient voltage suppressor for SLIC protection

LCP154DJF
Programmable transient voltage suppressor for SLIC protection
5LQJ
*Q
1&
7LS
3RZHU)/$7Œ[
Features
• Programmable transient suppressor
• Wide negative firing voltage range: V_Gn = -
175 V max.
• Low dynamic switching voltages: V_FP and V_DGL
• Low gate triggering current: I_GT = 5 mA max.
• Peak pulse current:
– I_PP = 100 A (10/1000 µs)
– I_PP = 150 A (5/310 µs)
– I_PP = 500 A (2/10 µs)
• Holding current: I_H = 150 mA min.
Benefits
• Trisil™ is not subject to ageing and provides a
fail safe mode in short circuit for a better level
of protection.
• Trisils are used to ensure equipment meets
various standards such as UL60950,
IEC 60950 / CSA C22.2, UL1459, TIA-968-A
(formerly FCC part 68)
• Trisils have UL94 V0 approved resin (Trisils
are UL497B approved [file: E136224]).
Datasheet - production data
Description
This device has been especially designed to
protect new high voltage, as well as classical
SLICs, against transient overvoltages.
Positive overvoltages are clamped by 2 diodes.
Negative surges are suppressed by 2 thyristors,
their breakdown voltage being referenced to -V_BAT
through the gate.
LCP154DJF is specified to comply with
ITU-T K20/21/45 and GR1089-Core when
associated with Cooper Bussmann Telecom
Circuit Protector fuse TCP 1.25 A.
LCP154DJF is packaged in a PowerFLAT™ 5x6
to meet IEC/UL 60950 clearance requirements.
Figure 1. Functional diagram
7RSYLHZ
*1'
7LS
1&
*Q 5LQJ
TM: Trisil is a trademark of STMicroelectronics
September 2015
This is information on a product in full production.
DocID028213 Rev 1
1/13
www.st.com