L9959S Datasheet, PDF (1/43 Pages) STMicroelectronics – Single and dual PMOS high-side H-bridge

L9959S
L9959T
Single and dual PMOS high-side H-bridge
Datasheet - production data
'!0'03
PowerSSO24
'!0'03
PowerSSO36
Features
 Full path R_DSON less than 540 m
 Continuous load current > 3 A
 Operating battery supply voltage 5 V to 28 V
 Operating V_DD supply voltage 4.5 V to 5.5 V
 All ECU internal pins can withstand up to 18 V
 Output switching frequency up to 11 kHz
 Monitoring of V_DD supply voltage
 SPI programmable output current limitation
from 5 A to 8.6 A (in 3 steps)
 Over temperature and short circuit protection
 Full diagnosis capability
 Fast switch-off open-drain input/output
 Current-monitoring with current feedback
output signal CF
 SPI-interface for configuration and diagnosis
 Error history in second diagnosis register
 Two independent enable pins: "/ABE" and
"DIS"
 Control of power stages by SPI or two input
signals, PWM and DIR (configurable via SPI)
 Logic levels 5 V compatible
 Conformity to improved EMC requirements due
to smart H-bridge switching
Description
L9959S and L9959T are a single and dual
integrated H-bridges for resistive and inductive
loads featuring output current direction and
supervising functions.
The PowerSSO24 houses one full H-Bridge, while
the PowerSSO36 houses two H-Bridges that can
work in parallel, through independent input driving
commands.
Target application ranges from throttle control
actuators to exhaust gas recirculation control
valves in automotive domain to a more general
use to drive DC and Stepper motors.
Order code
L9959S-TR
L9959T-TR
Table 1. Device summary
Package
PowerSSO24
PowerSSO36
Packing
Tape & Reel
Tape & Reel
September 2013
This is information on a product in full production.
DocID023416 Rev 6
1/43
www.st.com
1