|
L9524C Datasheet, PDF (1/27 Pages) STMicroelectronics – Glow plug system control IC | |||
|
L9524C
Glow plug system control IC
Features
â Quad gate driver for external N-channel Power
MOSFETs in high-side configuration:
â Gates driven by PWM output signal
â Adjustable gate charge/discharge currents
â Limited gate-to-source voltages
â Negative clamping for inductive loads
â Advanced run-off control
â Regulation of the power through the glow
plugs
â Control output for external relay driver
â Battery-voltage-compatible two-wire interface
â Supply voltage monitoring with shutdown
â Battery voltage monitoring with shutdown
â Junction temperature monitoring with
shutdown
â Monitoring of currents through the glow plugs
with shutdown at overcurrent (adjustable
threshold)
â Monitoring of external switches
â Charge pump voltage monitoring with
shutdown
â Active clamping during load dump
SO24
Description
The L9524C is a control IC for up to six glow
plugs of diesel engines. The glow plugs are
switched by up to four external PWM-controlled
N-channel Power MOSFETs or a single relay in
high-side configuration.
Supply voltage, battery voltage, junction
temperature, switches, currents through the glow
plugs, and charge pump voltage are monitored.
A two-wire interface is used to communicate with
the diesel engine management system.
Table 1. Device summary
Order code
L9524C
L9524C-TR
Package
SO24
SO24
Packing
Tube
Tape and reel
January 2008
Rev 3
1/27
www.st.com
1
|
▷ |