L79L05ABZ-AP Datasheet, PDF (1/27 Pages) STMicroelectronics – Output current up to 100 mA

L79LxxAB
L79LxxAC - L79LxxC
Negative voltage regulators
Features
■ Output current up to 100 mA
■ Output voltages of -5; -6; -8; -9; -12; -15 V
■ Thermal overload protection
■ Short circuit protection
■ No external components are required
■ Available in either ±5% (AC) or ±10% (C)
selection
Description
The L79Lxx series of three-terminal negative
regulators employ internal current limiting and
thermal shutdown, making them essentially
indestructible. If adequate heat-sink is provided,
they can deliver up to 100 mA output current.
They are intended as fixed voltage regulators in a
wide range of applications including local or on-
card regulation for elimination of noise and
distribution problems associated with single-point
regulation. In addition, they can be used with
TO-92
SO-8
SOT-89
power pass elements to make high-current
voltage regulators.
The L79Lxx series used as Zener diode/resistor
combination replacement, offers an effective
output impedance improvement of typically two
orders of magnitude, along with lower quiescent
current and lower noise.
Table 1. Device summary
L79L05AC
L79L05AB
L79L06C
L79L06AC
L79L06AB
L79L08C
L79L08AC
L79L08AB
L79L09C
July 2009
Part numbers
Doc ID 2511 Rev 16
L79L09AC
L79L09AB
L79L12C
L79L12AC
L79L12AB
L79L15C
L79L15AC
L79L15AB
1/27
www.st.com
27