|
L7980 Datasheet, PDF (1/44 Pages) STMicroelectronics – 2 A step-down switching regulator | |||
|
L7980
2 A step-down switching regulator
Features
â 2 A DC output current
â 4.5 V to 28 V input voltage
â Output voltage adjustable from 0.6 V
â 250 kHz switching frequency, programmable
up to 1 MHz
â Internal soft-start and enable
â Low dropout operation: 100% duty cycle
â Voltage feed-forward
â Zero load current operation
â Overcurrent and thermal protection
â VFQFPN3x3-8L and HSOP8 package
Applications
â Consumer:
STB, DVD, DVD recorder, car audio, LCD TV
and monitors
â Industrial:
PLD, PLA, FPGA, chargers
â Networking: XDSL, modems, DC-DC modules
â Computer:
Optical storage, Hard disk drive, Printers,
Audio/graphic cards
â LED driving
Figure 1. Application circuit
VFQFPN8 3x3
HSOP8 exposed pad
Description
The L7980 is a step down switching regulator with
2.5 A (minimum) current limited embedded power
MOSFET, so it is able to deliver up to 2 A current
to the load depending on the application
conditions.
The input voltage can range from 4.5 V to 28 V,
while the output voltage can be set starting from
0.6 V to VIN.
Requiring a minimum set of external components,
the device includes an internal 250 kHz switching
frequency oscillator that can be externally
adjusted up to 1 MHz.
The QFN and the HSOP packages with exposed
pad allow reducing the RthJA down to 60 °C/W
and 40 °C/W respectively.
December 2010
Doc ID 15181 Rev 4
1/44
www.st.com
44
|
▷ |