L6375S Datasheet, PDF (1/17 Pages) STMicroelectronics – 0.5A high-side driver industrial intelligent power switch

L6375S
0.5A high-side driver industrial intelligent power switch
Preliminary Data
Features
■ 0.5A output current
■ 8V to 35V supply voltage range
■ Internal current limiting
■ Thermal shutdown
■ Open ground protection
■ Internal negative voltage clamping for fast
demagnetization
■ Differential inputs with large common mode
range and threshold hysteresis
■ Undervoltage lockout with hysteresis
■ Open load detection
■ Two diagnostic outputs
■ Output status LED driver
■ Non dissipative short circuit protection
■ Immunity against burst transient
(IEC 61000-4-4)
■ ESD protection (human body model ±2kV)
SO-8
Description
The L6375S is a monolithic Intelligent Power
Switch in Multipower BCD Technology, for driving
inductive or resistive loads with controlled output
voltage slew rate and short circuit protection.
An internal Clamping Diode enables the fast
demagnetization of inductive loads. Diagnostic for
CPU feedback and extensive use of electrical
protections make this device extremely rugged
and specially suitable for industrial automation
applications.
Table 1. Device summary
Order codes
Op. temp. range, °C
L6375S
-25 to +125
L6375STR
-25 to +125
Package
SO-8
SO-8
Packaging
Tube
Tape & Reel
October 2007
Rev 5
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
1/17
www.st.com
17