L6375D Datasheet, PDF (1/16 Pages) STMicroelectronics – 0.5A high-side driver industrial intelligent power switch

L6375D
0.5A high-side driver industrial intelligent power switch
Features
■ 0.5A output current
■ 8V to 35V supply voltage range
■ Internal current limiting
■ Thermal shutdown
■ Open ground protection
■ Internal negative voltage clamping for fast
demagnetization
■ Differential inputs with large common mode
range and threshold hysteresis
■ Undervoltage lockout with hysteresis
■ Open load detection
■ Two diagnostic outputs
■ Output status LED driver
■ Non dissipative short circuit protection
■ Immunity against burst transient
(IEC 61000-4-4)
■ ESD protection (human body model ±2kV)
SO20
Description
The L6375D is a monolithic Intelligent Power
Switch in Multipower BCD Technology, for driving
inductive or resistive loads with controlled output
voltage slew rate and short circuit protection.
An internal Clamping Diode enables the fast
demagnetization of inductive loads. Diagnostic for
CPU feedback and extensive use of electrical
protections make this device extremely rugged
and specially suitable for industrial automation
applications.
Table 1. Device summary
Order codes
Op. temp. range, °C
L6375D
-25 to +125
L6375DTR
-25 to +125
Package
SO20
SO20
July 2007
Rev 1
Packaging
Tube
Tape & Reel
1/16
www.st.com
16