|
L6362A Datasheet, PDF (1/37 Pages) STMicroelectronics – IO-Link communication transceiver device IC | |||
|
L6362A
IO-Link communication transceiver device IC
Features
ï· Supply voltage from 7 V to 36 V
ï· 5 V and 3.3 V compatible I/Os
ï· 5 V or 3.3 V, 10 mA selectable linear
regulator
ï· 0.3 A output current intervention threshold
ï· Fully protected
ï Reverse polarity
ï Overload with cut-off function
ï Overtemperature
ï Undervoltage and overvoltage
ï GND and VCC open wire
ï· -40 to +125 °C ambient temperature
ï· Selectable output stages: high-side, low-
side, push-pull
ï· Suitable to drive L, C and R loads
ï· 30 μF output load drive capability
ï· Switching capability of inductors up to 500
mJ
ï· Wake-up detection supported
ï· Fast demagnetization of inductive loads
ï· COM1, COM2 and COM3 mode supported
ï· Designed to meet:
ï Burst IEC 61000-4-4
Datasheet - production data
ï ESD IEC 61000-4-2
ï Surge EN60947-5-2 and IEC61000-4-5
ï· Miniaturized DFN12 (3x3 mm) package
Applications
ï· Industrial sensors
ï· Factory automation
ï· Process control
Description
The L6362A is an IO-Link and SIO mode
transceiver device compliant to PHY2 (3-wire
connection) supporting COM1 (4.8 kbaud),
COM2 (38.4 kbaud) and COM3 (230.4 kbaud)
modes. The output stage can be configured as
high-side, low-side or push-pull and it can drive
resistive, capacitive and inductive loads. It can be
connected to a sensor chip with the industrial 24
V environment. The industrial environment could
be a PLC, an IO-Link master, a relay or a valve.
The L6362A is protected against reverse polarity,
among VCC, GND, OUTH, OUTL and I/Q pins.
Furthermore, the IC is protected against output
short-circuit, overvoltage and fast transient
conditions (±1 kV, 500 Ω and 18 μF coupling).
Table 1: Device summary
Order code
Package
Packing
L6362A
DFN12 (3x3 mm)
Tape and
reel
February 2016
DocID027660 Rev 4
This is information on a product in full production.
1/37
www.st.com
|
▷ |