JTS393 Datasheet, PDF (1/10 Pages) STMicroelectronics – Micropower dual CMOS voltage comparator: unsawn wafer

JTS393
Micropower dual CMOS voltage comparator: unsawn wafer
Datasheet - production data
Description
The JTS393 is a micro power CMOS dual voltage
comparator with extremely low consumption of
9 µA typical per comparator (20 times less than
the dual bipolar LM393 device). Similar
performance is offered by the dual micropower
TS3702 (or JTS3702 in wafer version) with a
push-pull CMOS output. Thus, response times
remain similar to the LM393.
Unsawn wafer
Features
• Extremely low supply current: typically 9 µA per
comparator
• Wide single supply range: 2.7 V to 16 V or dual
supplies (±1.35 V to ±8 V)
• Extremely low input bias current: 1 pA typical
• Extremely low input offset currents: 1 pA typical
• Input common-mode voltage range includes
ground
• High input impedance: 10¹² Ω typical
• Fast response time: 2.5 µs typical for 5 mV
overdrive
• Functionally compatible with bipolar LM393
Related products
• See TS393 for plastic packaged version
December 2013
This is information on a product in full production.
DocID025633 Rev 1
1/10
www.st.com