|
JTS3702 Datasheet, PDF (1/10 Pages) STMicroelectronics – Micropower dual CMOS voltage comparator: unsawn wafer | |||
|
JTS3702
Micropower dual CMOS voltage comparator: unsawn wafer
Datasheet - production data
Related products
⢠See TS3702 for plastic packaged version
Description
The JTS3702 is a micro power CMOS dual
voltage comparator with an extremely low
consumption of 9 µA typical per comparator (20
times less than the bipolar LM393). The push-pull
CMOS output stage allows power and space
saving by eliminating the external pull-up resistor
required by usual open-collector output
comparators. Thus, response times remain
similar to the LM393.
Unsawn wafer
Features
⢠Push-pull CMOS output (no external pull-up
resistor required)
⢠Extremely low supply current: 9 µA typ per
comparator
⢠Wide single supply range: 2.7 V to 16 V or dual
supplies (±1.35 V to ±8 V)
⢠Extremely low input bias current: 1 pA typ
⢠Extremely low input offset current: 1 pA typ
⢠Input common-mode voltage range includes
GND
⢠High input impedance: 1012 Ω typ
⢠Fast response time: 2 µs typ for 5 mV overdrive
⢠Functionally compatible with bipolar LM393
December 2013
This is information on a product in full production.
DocID025632 Rev 1
1/10
www.st.com
|
▷ |