HDMI05-CL02F3 Datasheet, PDF (1/9 Pages) STMicroelectronics – 5-line IPAD™, HDMI™ control line ESD protection

HDMI05-CL02F3
5-line IPAD™, HDMI™ control line ESD protection
Features
■ Low line capacitance: 12 pF max.
■ High efficiency in ESD protection
■ Lead-free package
■ Very thin package
■ High reliability offered by monolithic integration
■ High reduction of parasitic elements through
integration and wafer level packaging
Complies with the standards:
■ IEC 61000-4-2 Level 4
– ± 15 kV (air discharge)
– ± 8 kV (contact discharge)
■ IEC 61000-4-2 Level 1
– ± 2 kV (air discharge)
– ± 2 kV (contact discharge)
Application
Where ESD protection for HDMI control lines
(CEC, HPD, SCL and SDA) is required:
■ Mobile phones and communication systems
■ Portable multimedia players
■ Camcorder, digital still cameras
Description
The HDMI05-CL02F3 chip is a low capacitance
ESD protection for HDMI control pins. It also
integrates pull-up resistor for I²C bus and pull-
down resistor for hot plug detect and pull-up
resistor for CEC line.
The ESD protection circuitry prevents damage to
the protected device when subjected to ESD
surges up to 15 kV.
Flip Chip
9 bumps
Figure 1. Pin configuration (bump side)
321
SCL CEC 5V
A
SDA GND RPU2
B
HPD GND RPU
C
Figure 2. Schematic
A1
5V
A2 ^CEC
A3 ^SCL
B3 ^SDA
C3 HPD
B2 and C2 are ground pins
C1
B1
TM: IPAD is a trademark of STMicroelectronics. HDMI, the
HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI
Licensing LLC.
April 2010
Doc ID 15516 Rev 2
1/9
www.st.com
9