HCF4016B_01 Datasheet, PDF (1/9 Pages) STMicroelectronics – QUAD BILATERAL SWITCH

HCF4016B
QUAD BILATERAL SWITCH
s 20V DIGITAL OR ±10V PEAK TO PEAK
SWITCHING
s 280Ω TYPICAL ON RESISTANCE FOR 15V
OPERATION
s SWITCH ON RESISTANCE MATCHED TO
WITHIN 10Ω TYP. OVER 15V SIGNAL INPUT
RANGE
s HIGH ON/OFF OUTPUT VOLTAGE RATIO :
65dB TYP. at f_IS = 10KHz, R_L = 10KΩ
s HIGH DEGREE OF LINEARITY : < 0.5%
DISTORTION TYP. at f_IS = 1KHz, V_IS = 5 V_pp,
V_DD - V_SS > 10V, RL = 10KΩ
s EXTREMELY LOW OFF SWITCH LEAKAGE
RESULTING IN VERY LOW OFFSET
CURRENT AND HIGH EFFECTIVE OFF
RESISTANCE : 100pA TYP.
at V_DD - V_SS = 18V, T_amb = 25°C
s EXTREMELY HIGH CONTROL INPUT
IMPEDANCE (control circuit isolated from
signal circuit 10¹²â„¦ typ.)
s LOW CROSSTALK BETWEEN SWITCHES :
50dB Typ. at f_IS = 0.9MHz, R_L = 1KΩ
s MATCHED CONTROL - INPUT TO SIGNAL
OUTPUT CAPACITANCE : REDUCES
OUTPUT SIGNAL TRANSIENTS
s FREQUENCY RESPONSE SWITCH ON :
40MHz (Typ.)
s QUIESCENT CURRENT SPECIF. UP TO 20V
s 5V, 10V AND 15V PARAMETRIC RATINGS
s INPUT LEAKAGE CURRENT
I_I = 100nA (MAX) AT V_DD = 18V T_A = 25°C
PIN CONNECTION
DIP
SOP
ORDER CODES
PACKAGE
TUBE
DIP
SOP
HCF4016BEY
HCF4016BM1
T&R
HCF4016M013TR
s 100% TESTED FOR QUIESCENT CURRENT
s MEETS ALL REQUIREMENTS OF JEDEC
JESD13B " STANDARD SPECIFICATIONS
FOR DESCRIPTION OF B SERIES CMOS
DEVICES"
DESCRIPTION
The HCF4016B is a monolithic integrated circuit
fabricated in Metal Oxide Semiconductor
technology available in DIP and SOP packages.
The HCF4016B is a QUAD BILATERAL SWITCH
intended for the transmission or multiplexing of
analog or digital signals.
Each of the four independent bilateral switches
has a single control signal input which
simultaneously biases both the p and n device in a
given switch ON or OFF.
September 2001
1/9