GS-DC200 Datasheet, PDF (1/7 Pages) STMicroelectronics – STEPPER MOTOR CONTROL AND DRIVE SYSTEM FAMILY

GS-DC200 Family
STEPPER MOTOR CONTROL AND DRIVE SYSTEM FAMILY
DESCRIPTION
The GS-DC200 series is a family of single Eurocard
boards that contain all the logic necessary to oper-
ate a stepper motor, including the instructions de-
coding, the step timing generation, the storage of
the program to be executed. The motor interface
can deliver phase current up to 2.5A.
The boards can be used as a stand alone complete
motion control system or they can be driven by a
central host computer.
The GS-DC200 family is built around the GS-C200,
GS-C200S, GS-D200, GS-D200S modules, (see
the relevant data sheet) and it retains all the fea-
tures of these modules.
SELECTION CHART
Ordering Number
GS-DC200
GS-DC200S
GS-DC200SS
Controller
Sequencer Driver
GS-C200+GS-D200
GS-C200+GS-D200S
GS-C200S+GS-D200S
Instruction
Set Commands
25
25
29
Phase
Current (A)
2.0
2.5
2.5
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Vs
Tstg
Thop
DC Supply Voltage
Storage Temperature Range
Max Operating Heatsink Temperature (GS-D200/200S)
Value
42
–40 to +105
+85
Unit
V
°C
°C
June 1994
1/7