EVALSPEAR600 Datasheet, PDF (1/3 Pages) STMicroelectronics – Evaluation board for SPEAr600 embedded MPU

EVALSPEAr600
Evaluation board for SPEAr600 embedded MPU
Data brief
Features
■ SPEAr600 embedded MPU
■ Up to 2 Gbits DDR2 333 MHz (std 128 MB)
■ Up to 16 MB Serial Flash (std 8 MB)
■ Up to 2 Gb NAND Flash (std 64 MB)
■ 4 Kb Serial I²C
■ Two USB 2.0 full Host port channels
■ One USB 2.0 HS Device
■ 10/100/1000 Ethernet port
■ Two serial ports (up to 115 Kbaud)
■ Debug ports (JTAG + ETM9)
■ 8 ADC channels (10 bit, 1 Msamples)
■ 10 GPIOs
■ LCD I/F up to 24 bits-per-pixel (bpp)
■ Additional 112 GPIOs when the external FPGA
is used
Description
The EVALSPEAr600 evaluation board allows you
to quickly evaluate and debug software for the
SPEAr600. It acts as a learning tool to rapidly get
familiar with the SPEAr600 features and provides
a starting point for the development of the final
application board. It is equipped with most of the
interfaces offered by the SPEAr600.
It is equipped with all the interfaces offered by the
SPEAr600. A special version of the board
populated with an FPGA also exists for
developing customer-specific IPs.
Figure 1. EVALSPEAr600 evaluation board
September 2010
Doc ID 18020 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3