EVALSPEAR320PLC Datasheet, PDF (1/3 Pages) STMicroelectronics – Evaluation board for SPEAr320 embedded MPU

EVALSPEAr320PLC
Evaluation board for SPEAr320 embedded MPU
Data brief
Features
■ CPU board
– SPEAr320 embedded MPU
– Up to 2 Gbits DDR2 333 MHz (std 128
Mbytes)
– Up to 16 Mbytes serial Flash memory (std 8
Mbytes)
– Two USB 2.0 full host port channels
– One USB 2.0 host device port
– One serial port (up to 115 baud)
– JTAG debug ports
■ Application board
– 2 x Ethernet RJ-45 connectors
(ST802RT1A)
– 2 x CAN DB9 plug connectors
– 3 x RS-232 DB9 plug connectors
(ST3232EBTR)
– 1 x RS-485 DB9 socket connector
(ST3485EBDR)
– Digital input connectors (parallel and serial)
compatible with STEVAL-IFP007V1,
STEVAL-IFP008V1 and STEVAL-
IFP004V1 evaluation boards
– Digital output connectors (parallel and
serial) compatible with STEVAL-IFP009V1,
STEVAL-IFP001V1, STEVAL-IFP002V1
and STEVAL-IFP006V1 evaluation boards
– On-board temperature sensor
(STLM20W87F) and potentiometer (analog
input for ADC)
– Analog extension connector featuring 8
ADC lines
– General-purpose extension connector with
GPIOs and I²C functionality
– DC/DC converter L7986A (+24 V / +5 V)
– MicroSD card socket
– 4 LEDs, 2 general-purpose buttons and
system reset button
Description
This evaluation board can be used to evaluate the
SPEAr320 microprocessor with a variety of
devices and especially its media independent
interface (MII) automation mode.
The EVALSPEAr320PLC evaluation board kit
consists of two boards: a CPU board and a MII
mode application board. The SPEAr320
microprocessor is mounted on the CPU board
that is plugged on the MII mode application board.
Figure 1. EVALSPEAr320PLC evaluation board
September 2010
Doc ID 18019 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3