EVALSP1340CPU Datasheet, PDF (1/3 Pages) STMicroelectronics – EVALSP1340 evaluation board (rev. 2.2) for SPEAr1340

EVALSP1340CPU
EVALSP1340 evaluation board (rev. 2.2) for SPEAr1340
Features
■ SPEAr1340 embedded MPU
■ 4 DDR3 chips (32-bit) 1 GB
■ Serial NOR Flash, 8 MB
■ 8-bit NAND Flash, 2 Gb
■ 16-bit NAND Flash expansion connector
■ Audio stereo jack and microphone
■ Two USB 2.0 high speed host ports
■ One OTG 2.0 high speed port (Micro USB-AB)
■ One 10/100/1000 Ethernet port
■ One PCIe X1 Root Complex connector
■ One SATA connector
■ One SDIO connector
■ One UART serial port (up to 115 Kbaud)
■ LCD connectors (LVDS bus - TFT panel)
■ Camera module
■ MEMS (accelerometer & magnetometer)
■ Debug port (CPU JTAG connector)
■ 10" LCD kit - order code EVALSP1340LCD
(optional)
■ CLCD Video HDMI transmitter plugboard -
order code EVALSP1340HDM (optional)
Data brief − preliminary data
Description
The evaluation board revision 2.2 is used to
enable quick evaluation and debugging of
software for the SPEAr1340 embedded MPU. It
acts as a learning tool for rapid familiarity with the
features of the SPEAr1340, as well as providing a
reference design to use as a starting point for the
development of a final application board.
The EVALSP1340CPU board is equipped with
interfaces to the high-speed peripherals
embedded in SPEAr1340 device.
April 2012
Doc ID 023095 Rev 1
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice. For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3