English
Language : 

EV-VNH5050A Datasheet, PDF (1/12 Pages) STMicroelectronics – EV-VNH5050A provides you an easy way
EV-VNH5050A
VNH5050A evaluation board
Features
Parameter
Symbol Value Unit
Max supply voltage
Operating voltage range
Max on-state resistance
(per leg)
High-side current
limitation (typ)
Off-state supply current
Vcc
Vcc
RON
41
V
5.5 to 18 V
50
mΩ
IUMH
42
A
Is
3
µA
• Simple single IC application board dedicated
for VNH5050-E
• Provides thermal heat-sinking for ease of use
in prototyping
• Provides electrical connectivity for easy
prototyping
Data brief
Description
EV-VNH5050A provides you an easy way to
connect ST’s surface mounted VIPower® HBridge
drivers into your existing prototype circuitry. This
evaluation board comes preassembled with
VNH5050A-E H-Bridge.
The VNH5050A-E is a system in package
H-Bridge manufactured in the ST proprietary
VIPower® M0- 5 technology and housed in the
PowerSSO-36 package. The VNH5050A-E is
designed to drive 12 V automotive bidirectional
load such as a PMDC motor. The VNH5050A-E
provides protection, diagnostics and easy 3 V and
5 V CMOS compatible interface with any
microcontroller.
The device integrates advanced protection
functions such as load current limitation, inrush
and active overload management by power
limitation, overtemperature shut-off with
autorestart and overvoltage active clamp. A
dedicated analog current sense pin is associated
with every output channel in order to provide
Enhanced diagnostic functions including fast
detection of overload and short-circuit to ground
through power limitation indication, over-
temperature indication, short-circuit to VCC
protection and diagnosis as well as on-state and
off-state open-load detection.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to allow sharing of the external
sense resistor with other similar devices.
Order codes
EV-VNH5050A
Table 1. Device summary
Reference
EV-VNH5050A evaluation board
February 2014
DocID025031 Rev 3
For further information contact your local STMicroelectronics sales office.
1/12
www.st.com