EV-VND5E160AJ Datasheet, PDF (1/8 Pages) STMicroelectronics – The current sensing and diagnostic feedback

EV-VND5E160AJ
VND5E160AJ evaluation board
Features
Parameter
Symbol Value Unit
Max supply voltage
V_CC
41
V
Operating voltage range V_CC 4.5 to 28 V
Max On-State resistance R_ON
160 mΩ
Current limitation (typ)
Off state supply current
I_LIMH
I_S
10
A
2
µA⁽¹⁾
1. Typical value with all loads connected.
■ Simple single IC application board dedicated
for VND5E160AJ-E
■ Provides thermal heat-sinking for ease of use
in prototyping.
■ Provides electrical connectivity for easy
prototyping
Description
EV-VND5E160AJ provides you an easy way to
connect ST’s surface mounted VIPower^® drivers
into your existing prototype circuitry. This
evaluation board comes pre-assembled with
VND5E160AJ-E high-side driver.
The VND5E160AJ-E is a double channel high-
side driver manufactured using ST proprietary
VIPower M0-5 technology and housed in
PowerSSO-12 package. The VND5E160AJ-E is
designed to drive 12V automotive grounded
loads, providing protection, diagnostics and easy
3 V and 5 V CMOS-compatible interface with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto-
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
Data brief − production data
output channel provides enhanced diagnostic
functions including fast detection of overload and
short-circuit to ground through power limitation
indication, overtemperature indication, short-
circuit to V_CC diagnosis and ON-state and
OFF-state open-load detection.
The current sensing and diagnostic feedback of
the whole device can be disabled by pulling the
CS_DIS pin high to share the external sense
resistor with similar devices.
Figure 1. VND5E160AJ evaluation board
Table 1. Device summary
Order code
Reference
EV-VND5E160AJ VND5E160AJ evaluation board
September 2013
Doc ID 023959 Rev 2
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
1/8
www.st.com
1