EV-VN5E025AJ Datasheet, PDF (1/8 Pages) STMicroelectronics – Provides electrical connectivity for easy prototyping

EV-VN5E025AJ
VN5E025AJ evaluation board
Features
Parameter
Symbol Value Unit
Max supply voltage
V_CC
41
V
Operating voltage range V_CC 4.5 to 28 V
Max On-State resistance R_ON
25 mΩ
Current limitation (typ)
Off state supply current
I_LIMH
I_S
60
A
2
µA⁽¹⁾
1. Typical value with all loads connected.
■ Simple single IC application board dedicated
for VN5E025AJ-E
■ Provides thermal heat-sinking for ease of use
in prototyping
■ Provides electrical connectivity for easy
prototyping
Description
EV-VN5E025AJ provides you an easy way to
connect ST’s surface mounted VIPower^® drivers
into your existing prototype circuitry. This
evaluation board comes pre-assembled with
VN5E025AJ-E high-side driver.
The VN5E025AJ-E is a single channel high-side
driver manufactured using ST proprietary
VIPower M0-5 technology and housed in
PowerSSO-12 package. The VN5E025AJ-E is
designed to drive 12 V automotive grounded
loads, providing protection, diagnostics and easy
3 V and 5 V CMOS-compatible interface with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shutoff with
autorestart and overvoltage active clamp. A
dedicated analog current sense pin is associated
Data brief − production data
with every output channel provides enhanced
diagnostic functions including fast detection of
overload and short-circuit to ground through
power limitation indication, over temperature
indication, short-circuit to V_CC diagnosis and
ON-state and OFF-state open-load detection. The
current sensing and diagnostic feedback of the
whole device can be disabled by pulling the
CS_DIS pin high to share the external sense
resistor with similar devices.
Figure 1. VN5E025AJ evaluation board
Table 1. Device summary
Order code
Reference
EV-VN5E025AJ VN5E025AJ evaluation board
September 2013
Doc ID 023956 Rev 2
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
1/8
www.st.com
1