EMIF10-LCD02F3_08 Datasheet, PDF (1/8 Pages) STMicroelectronics – 10-line IPAD, EMI filter and ESD protection for LCD and cameras

EMIF10-LCD02F3
10-line IPAD™, EMI filter and ESD protection for LCD and cameras
Features
■ Lead-free package
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ 400 µm pitch
■ Compatible with high speed data rate
■ Very low PCB space occupation: < 4mm²
■ Very thin package: 0.60 mm
■ High efficiency in ESD suppression
■ High reliability offered by monolithic integration
■ High reduction of parasitic elements through
integration and wafer level packaging
Complies with the following standards
■ IEC61000-4-2 level 4 on inputs and outputs
– 15 kV (air discharge)
– 8 kV (contact discharge)
■ MIL STD 883E - Method 3015-6 Class 3
Applications
Where EMI filtering in ESD sensitive equipment is
required :
■ LCD for mobile phones
■ Computers and printers
■ Communication systems
■ MCU boards
Description
The EMIF10-LCD02F3 is a 10-line highly
integrated device designed to suppress EMI/RFI
noise in all systems subjected to electromagnetic
interference. The EMIF10 Flip Chip packaging
means the package size is equal to the die size.
This filter includes ESD protection circuitry, which
prevents damage to the protected device when
subjected to ESD surges up 15kV.
Flip Chip
24 bumps
Figure 1. Pin layout (bump side)
5432
O1 O2 GND I1
1
I2 _A
O3 O4
I3 I4 _B
O5 O6 GND I5 I6 _C
O7 O8 GND I7 I8 _D
O9 O10 GND I9 I10 _E
Figure 2. Device configuration
Input
Low-pass Filter
Output
GND
GND
GND
Ri/o = 70Ω
Cline = 30pF
TM: IPAD is a trademark of STMicroelectronics.
April 2008
Rev 2
1/8
www.st.com
8