EMIF10-LCD02F3 Datasheet, PDF (1/8 Pages) STMicroelectronics – 10 line EMI filter and ESD protection for LCD and cameras

EMIF10-LCD02F3
10 line EMI filter and ESD protection for
LCD and cameras
Main product characteristics:
Where EMI filtering in ESD sensitive equipment is
required :
■ LCD for Mobile phones
■ Computers and printers
■ Communication systems
■ MCU Boards
Description
The EMIF10-LCD02F3 is a 10 lines highly
integrated devices designed to suppress EMI/RFI
noise in all systems subjected to electromagnetic
interferences. The EMIF10 flip chip packaging
means the package size is equal to the die size.
This filter includes ESD protection circuitry, which
prevents damage to the application when
subjected to ESD surges up 15kV.
Flip-Chip
(24 bumps)
Pin Configuration (bump side)
54321
O1 O2 GND I1 I2 _A
O3 O4
I3 I4 _B
O5 O6 GND I5 I6 _C
O7 O8 GND I7 I8 _D
Benefits
■ Lead free package
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ 400 µm pitch
■ Compatible with high speed data rate
■ Very low PCB space consuming: < 4mm²
■ Very thin package: 0.60 mm
■ High efficiency in ESD suppression
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
integration and wafer level packaging
Order Code
Part Number
EMIF10-LCD02F3
Marking
GY
O9 O10 GND I9 I10 _E
Basic Cell Configuration
Input
Low-pass Filter
Output
GND
GND
GND
Ri/o = 70Ω
Cline = 30pF
Complies with the following standards:
IEC61000-4-2:
Level 4
15 kV (air discharge)
8 kV ( contact discharge)
on inputs and outputs
MIL STD 833E - Method 3015-6 Class 3
July 2005
Rev 1
1/8
www.st.com
8