EMIF10-LCD01F2 Datasheet, PDF (1/8 Pages) STMicroelectronics – 10 line EMI filter and ESD protection

IPAD™
EMIF10-LCD01F2
10 line EMI filter and ESD protection
Main product characteristics:
Where EMI filtering in ESD sensitive equipment is
required :
■ LCD for Mobile phones
■ Computers and printers
■ Communication systems
■ MCU Boards
Description
The EMIF10-LCD01F2 is a 10 line highly
integrated device designed to suppress EMI/RFI
noise in all systems subjected to electromagnetic
interferences. The EMIF10 Flip-Chip packaging
means the package size is equal to the die size.
This filter includes ESD protection circuitry, which
prevents damage to the application when it is
subjected to ESD surges up to 15 kV.
Benefits
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ Very low PCB space consuming: < 6 mm²
■ Lead free package
■ Very thin package: 0.69 mm
■ High efficiency in ESD suppression on input
pins (IEC 61000-4-2 level 4)
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
integration and wafer level packaging.
Complies with following standards:
IEC 61000-4-2
level 4 input pins
15 kV (air discharge)
8 kV (contact discharge)
MIL STD 883G - Method 3015-7 Class 3
Flip-Chip
(25 bumps)
Order code
Part Number
EMIF10-LCD01F2
Marking
FL
Figure 1.
Pin Configuration (bump side)
54321
I5 I4 I3 I2 I1 A
I10 I9 I8 I7 I6 B
C ^{GND GND GND GND GND}
O10 O9 O8 O7 O6 D
O5 O4 O3 O2 O1 E
Figure 2. Basic Cell Configuration
Input
Low-pass Filter
Output
Ri/o = 100Ω
Cline = 35pF
GND
GND
GND
TM: IPAD is a trademark of STMicroelectronics.
January 2007
Rev 3
1/8
www.st.com
8