EMIF10-LCD01F1 Datasheet, PDF (1/6 Pages) STMicroelectronics – 10 LINES EMI FILTER AND ESD PROTECTION

®
IPAD^TM
EMIF10-LCD01F1
10 LINES EMI FILTER
AND ESD PROTECTION
MAIN PRODUCT CHARACTERISTICS:
Where EMI filtering in ESD sensitive equipment is
required :
s LCD for Mobile phones
s Computers and printers
s Communication systems
s MCU Boards
DESCRIPTION
The EMIF10-LCD01F1 is a 10 lines highly
integrated devices designed to suppress EMI/RFI
noise in all systems subjected to electromagnetic
interferences. The EMIF10 flip chip packaging
means the package size is equal to the die size.
This filter includes an ESD protection circuitry,
which prevents the device from destruction when
subjected to ESD surges up 15kV.
BENEFITS
s EMI symmetrical (I/O) low-pass filter
s High efficiency in EMI filtering
s Very low PCB space consuming:
2.64mm x 2.64mm
s Very thin package: 0.65 mm
s High efficiency in ESD suppression on input
pins (IEC6100-4-2 level 4)
s High reliability offered by monolithic integration
s High reducing of parasitic elements through in-
tegration & wafer level packaging.
COMPLIES WITH THE FOLLOWING STANDARDS:
IEC61000-4-2
Level 4 input pins 15kV (air discharge)
8 kV (contact discharge)
Level 1 output pins 2kV (air discharge)
2kV (contact discharge)
MIL STD 883E - Method 3015-6 Class 3
BASIC CELL CONFIGURATION
Flip Chip package
PIN CONFIGURATION (ball side)
54321
I5 I4 I3 I2 I1 _A
I10 I9 I8 I7 I6 _B
C ^{GND GND GND GND GND}
O10 O9 O8 O7 O6 _D
O5 O4 O3 O2 O1 _E
Input
Low-pass Filter
Output
Ri/o = 100Ω
Cline = 35pF
GND
GND
GND
TM : IPAD is a trademark of STMicroelectronics.
November 2003 - Ed: 2A
1/6