EMIF10-LCD01C2 Datasheet, PDF (1/7 Pages) STMicroelectronics – 10 LINE EMI FILTER AND ESD PROTECTION

®
IPAD™
EMIF10-LCD01C2
10 LINE EMI FILTER
AND ESD PROTECTION
MAIN PRODUCT CHARACTERISTICS:
Where EMI filtering in ESD sensitive equipment is
required :
■ LCD for Mobile phones
■ Computers and printers
■ Communication systems
■ MCU Boards
DESCRIPTION
The EMIF10-LCD01C2 is a 10 line highly integrat-
ed devices designed to suppress EMI/RFI noise in
all systems subjected to electromagnetic interfer-
ences. The EMIF10 flip chip packaging means the
package size is equal to the die size.
This filter includes an ESD protection circuitry,
which prevents the device from destruction when
subjected to ESD surges up 15kV.
BENEFITS
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ Very low PCB space consuming: < 7mm²
■ Coating resin on back side
■ Very thin package: 0.69 mm
■ High efficiency in ESD suppression on input
pins (IEC61000-4-2 level 4)
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
integration and wafer level packaging.
■ Lead free package
COMPLIES WITH THE FOLLOWING STANDARDS:
IEC61000-4-2:
Level 4 input pins 15kV (air discharge)
8kV (contact discharge)
Level 1 output pins 2kV (air discharge)
2kV (contact discharge)
MIL STD 833E - Method 3015-6 Class 3
Lead free coated Flip-Chip
(25 bumps)
Figure 1: Pin Configuration (bump side)
54321
I5 I4 I3 I2 I1 _A
I10 I9 I8 I7 I6 _B
C ^{GND GND GND GND GND}
O10 O9 O8 O7 O6 D
O5 O4 O3 O2 O1 E
Figure 2: Basic Cell Configuration
Input
Low-pass Filter
Output
Ri/o = 100Ω
Cline = 35pF
GND
GND
GND
Table 1: Order Code
Part Number
Marking
EMIF10-LCD01C2
FL
August 2005
REV. 1
1/7