EMIF10-COM01C2 Datasheet, PDF (1/7 Pages) STMicroelectronics – EMI Filter including ESD protection

IPAD™
EMIF10-COM01C2
EMI Filter including ESD protection
Main product characteristics
EMI filtering and ESD protection for:
■ Computers and printers
■ Communication systems
■ Mobile phones
Description
The EMIF10-COM01C2 is a highly integrated
device designed to suppress EMI / RFI noise in all
systems subjected to electromagnetic
interferences. The EMIF10 Flip-Chip packaging
means the package size is equal to the die size.
Additionally, this filter includes an ESD protection
circuitry which prevents damage to the application
when subjected to ESD surges up to 15 kV.
Benefits
■ EMI symmetrical (I/O) low-pass filter
■ Coating resin on flat side
■ Very low PCB space consuming: < 6 mm²
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression on both
input and output pins
■ High reliability offered by monolithic integration
■ Lead free package
Complies with the following standards:
IEC 61000-4-2 level 4
15 kV (air discharge)
8 kV (contact discharge)
Lead free coated Flip-Chip
(25 Bumps)
Order code
Part Number
EMIF10-COM01C2
Marking
FE
Figure 1. Pin configuration (Bump side)
543 21
I5
I4
I3
I2
I1 A
I10
I9
I8
I7
I6 B
GND GND GND GND GND C
010 09
08
07
06 D
05
04
03
02
01 E
Figure 2. Basic cell configuration
Input
Low-pass Filter
Output
TM: IPAD is a trademark of STMicroelctronics
RI/O = 200Ω
Cline = 45 pF
April 2006
Rev4
1/7
www.st.com
7