EMIF10-1K010F2_08 Datasheet, PDF (1/8 Pages) STMicroelectronics – 10-line IPAD™, EMI filter including ESD protection

EMIF10-1K010F2
10-line IPAD™, EMI filter including ESD protection
Features
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ Lead free package
■ Very low PCB space consuming:
2.42 mm x 2.42 mm
■ Very thin package: 0.650 mm
■ High efficiency in ESD suppression on both
input and output pins (IEC 61000-4-2 level 4)
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
integration & wafer level packaging
Complies with the following standards:
■ IEC 61000-4-2 level 4
– 15 kV (air discharge)
– 8 kV (contact discharge)
■ MIL STD 883F - Method 3015.7 Class 3
Applications
Where EMI filtering in ESD sensitive equipment is
required:
■ Mobile Phones
■ Computers and printers
■ Communication systems
■ MCU Boards
Description
The EMIF10-1K010F2 is a highly integrated
device designed to suppress EMI / RFI noise in all
systems subjected to electromagnetic
interferences. The EMIF10 Flip-Chip packaging
means the package size is equal to the die size.
Additionally, this filter includes an ESD protection
circuitry which prevents damage to the application
when subjected to ESD surges up to 15 kV.
Flip Chip
(24 bumps)
Figure 1.
Pin configuration (bump side)
54321
I7 GND GND I3
A
I9 GND GND I5
I1 _B
I10 I8 I6 I4 I2 _C
09 07 05 03 01 _D
010 08 06 04 02 _E
Figure 2. Basic cell configuration
Input
Low pass filter
Output
RI/O = 1 kΩ
Cline = 100 pF
TM: IPAD is a trademark of STMicroelectronics.
April 2008
Rev 4
1/8
www.st.com
8