EMIF10-1K010F2 Datasheet, PDF (1/7 Pages) STMicroelectronics – EMI FILTER INCLUDING ESD PROTECTION

®
IPAD™
EMIF10-1K010F2
EMI FILTER
INCLUDING ESD PROTECTION
MAIN PRODUCT CHARACTERISTICS:
Where EMI filtering in ESD sensitive equipment is
required
■ Mobile phones and communication systems
■ Computers, printers and MCU Boards
DESCRIPTION
The EMIF10-1K010F2 is a highly integrated
devices designed to suppress EMI/RFI noise in all
systems subjected to electromagnetic
interferences. The EMIF10 flip chip packaging
means the package size is equal to the die size.
This filter includes an ESD protection circuitry
which prevents the device from destruction when
subjected to ESD surges up 15kV.
BENEFITS
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ Lead free package
■ Very low PCB space consuming:
2.57 mm x 2.57 mm
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
integration & wafer level packaging.
COMPLIES WITH THE FOLLOWING STANDARDS:
IEC61000-4-2
Level 4
15kV (air discharge)
8kV (contact discharge)
MIL STD 883E -Method 3015-6 Class 3
Figure 2: Basic Cell Configuration
Flip-Chip
(24 Bumps)
Table 1: Order Code
Part Number
EMIF10-1K010F2
Marking
FD
Figure 1: Pin Configuration (ball side)
5432
I7 GND GND I3
1
A
I9 GND GND I5
I1 _B
I10 I8 I6 I4 I2 _C
09 07 05 03 01 _D
010 08 06 04 02 _E
Input
Low-pass Filter
Output
Ri/o = 1kΩ
Cline = 100pF
GND
GND
GND
TM: IPAD is a trademark of STMicroelectronics.
October 2004
REV. 1
1/7