EMIF08-VID01C2_06 Datasheet, PDF (1/6 Pages) STMicroelectronics – 8 line low capacitance EMI filter and ESD protection

EMIF08-VID01C2
8 line low capacitance EMI filter and ESD protection
Main product characteristics
Where EMI filtering in ESD sensitive equipment is
required:
■ LCD and camera for mobile phones
■ Computers and printers
■ Communication systems
■ MCU Boards
Description
The EMIF08-VID01C2 is an 8 line highly
integrated device designed to suppress EMI/RFI
noise in all systems subjected to electromagnetic
interference. The Flip-Chip packaging means the
package size is equal to the die size.
This filter includes ESD protection circuitry, which
prevents damage to the application when it is
subjected to ESD surges up to 15 kV.
Benefits
■ High efficiency EMI filter (-33 dB @ 900 MHz)
■ Low line capacitance suitable for high speed
data bus
■ Low serial resistance for camera impedance
adaptation
■ Optimized PCB space consuming:
1.29 mm x 3.92 mm
■ Very thin package: 0.695 mm
■ Coating resin on back side and lead free
package
■ High efficiency in ESD suppression on inputs
pins (IEC 61000-4-2 level 4).
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
integration & wafer level packaging.
Coated Flip-Chip package
Pin configuration (Bump side)
12 11 10 9 8 7 6 5 4 3 2 1
I8 I7 I6 I5 I4 I3 I2 I1 ^A
GND
GND
GND
GND
B
O8 O7 O6 O5 O4 O3 O2 O1 _C
Complies with following standards:
IEC 61000-4-2
level 4 input pins
level 1 output pins
15 kV
8 kV
2 kV
2 kV
(air discharge)
(contact discharge
(air discharge)
(contact discharge
MIL STD 883E - Method 3015-6 Class 3
October 2006
Rev 4
1/6
www.st.com