EMIF07-LCD02F3_10 Datasheet, PDF (1/8 Pages) STMicroelectronics – 7-line IPAD™, EMI filter and ESD protection for LCD and cameras

EMIF07-LCD02F3
7-line IPAD™, EMI filter and ESD protection for LCD and cameras
Features
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ Lead-free package
■ Very low PCB space occupation:
1.94 mm x 1.54 mm
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression
■ High reliability offered by monolithic integration
■ High reduction of parasitic elements through
integration and wafer level packaging
Complies with the following standards
■ IEC 61000-4-2 level 4 on inputs and outputs:
– 15 kV (air discharge)
– 8 kV (contact discharge)
■ MIL STD 883G - Method 3015-7 Class 3
Applications
Where EMI filtering in ESD sensitive equipment is
required:
■ LCD for mobile phones
■ Computers and printers
■ Communication systems
■ MCU boards
Description
The EMIF07-LCD02F3 is a 7-line highly
integrated device designed to suppress EMI/RFI
noise in all systems subjected to electromagnetic
interference. The EMIF07 Flip Chip package
means the package size is equal to the die size.
This filter includes ESD protection circuitry, which
prevents damage to the protected device when
subjected to ESD surges up 15 kV.
Flip Chip
(18 bumps)
Figure 1. Pin layout (bump side)
54321
O1 O2 GND I1 I2 A
O3
GND
I3 B
O4 O5 GND I4
I5
C
O6 O7 GND I6
I7
D
Figure 2. Device configuration
Input
Low-pass Filter
Output
GND
GND
GND
Ri/o = 70 Ω
Cline = 30 pF
TM: IPAD is a trademark of STMicroelectronics.
February 2010
Doc ID 11639 Rev 3
1/8
www.st.com
8