EMIF06-USD14F3 Datasheet, PDF (1/8 Pages) STMicroelectronics – 6-line low capacitance IPAD for micro-SD card with EMI filtering and ESD protection

EMIF06-USD14F3
6-line low capacitance IPAD™ for micro-SD card
with EMI filtering and ESD protection
Datasheet  production data
Flip Chip (15 bumps)
Applications
 Consumer and computer electronics with
micro-SD card such as:
– Tablet and smartphone
– HD set-top boxes
– Camera
– Notebook
– Game console
– Mother boards
Features
 EMI low-pass filter
 ESD protection ±8 kV (IEC 61000-4-2)
 208 MHz clock frequency compatible with
SDR104 mode (SD3.0)
 Optimized PINOUT for easy PCB layout
 Lead-free package
Benefits
 Low power consumption
 Easy pins access (no tracks between bumps)
for easy PCB layout
 16 Bumps WLCSP package (with 400 µm
pitch) featuring natural PCB routing, cost
optimization and saving space on the board
 High reliability offered by monolithic integration
 Reduction of parasitic elements thanks to CSP
integration
Complies with the following standards:
 IEC 61000-4-2 level 4:
– ±15 kV (air discharge)
– ±8 kV (contact discharge)
Description
The EMIF06-USD14F3 is a 6-line EMI filter
dedicated to SD, mini-SD and micro-SD card
applications.
This filter includes ESD protection circuitry, which
prevents damage to the protected device when
inserting the card. Pull-up resistors are not
integrated inside the chip, hence the
EMIF06-USD14F3 gives the flexibility to
customers to use controllers with embedded
resistance. This 6-line IPAD ™ is packaged into a
flip-chip solution, saving PCB space.
Figure 1. Pin configuration (bump side)

$
%
&
'
TM: IPAD is a trademark of STMicroelectronics
December 2015
This is information on a product in full production.
DocID028200 Rev 1
1/8
www.st.com